Difficulty
Moderate
Steps
5
Time Required
User-Contributed Guide
This guide is not managed by the site's staff.
-
-
Install (4) M3 heatset inserts into Print Toolwiper part 01 as shown. (See heatset insert supplement for best practices.)
-
-
-
Install (2) M3 heatset inserts into Print Toolwiper part 02 as shown. (See heatset insert supplement for best practices.)
-
-
-
Assemble parts related to the tool wiping function in the following order as shown: 1. (1) Silicone Wiper, 2. (2) Print Tool Wiper Part 03 , 3. (1) Silicone Wiper, 4. (2) M3x6 fasteners
-
-
-
Install the silicone leak blocker and fasten using (2) M3x6 fasteners. The previously assembled Tool Wiper can now be secured using (2) M3x6 fasteners. Temporarily fit M3x16 fasteners for use later in assembly.
-
Repeat this entire procedure (steps 1-4) 1 time for each additional tool that will be fitted to the printer. Set aside.
-
Cancel: I did not complete this guide.
One other person completed this guide.
