Skip to main content
  1. Install (4) M3 heatset inserts into Print Toolwiper part 01 as shown. (See heatset insert supplement for best practices.)
  2. Install (2) M3 heatset inserts into Print Toolwiper part 02 as shown. (See heatset insert supplement for best practices.)
  3. Assemble parts related to the tool wiping function in the following order as shown:     1. (1) Silicone Wiper,     2. (2) Print Tool Wiper Part 03 ,    3. (1) Silicone Wiper, 4. (2) M3x6 fasteners
    • Assemble parts related to the tool wiping function in the following order as shown: 1. (1) Silicone Wiper, 2. (2) Print Tool Wiper Part 03 , 3. (1) Silicone Wiper, 4. (2) M3x6 fasteners

  4. Install the silicone leak blocker and fasten using (2) M3x6 fasteners. The previously assembled Tool Wiper can now be secured using (2) M3x6 fasteners. Temporarily fit M3x16 fasteners for use later in assembly.
    • Install the silicone leak blocker and fasten using (2) M3x6 fasteners. The previously assembled Tool Wiper can now be secured using (2) M3x6 fasteners. Temporarily fit M3x16 fasteners for use later in assembly.

    • Repeat this entire procedure (steps 1-4) 1 time for each additional tool that will be fitted to the printer. Set aside.

Finish Line

One other person completed this guide.

John Gilbert

Member since: 06/09/2020

2,497 Reputation

22 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 193